Cos-Queue Strict; No Cos-Queue Strict; Random-Detect; No Random-Detect - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Modes

cos-queue strict

This command activates the strict priority scheduler mode for each specified queue.
Format
Modes

no cos-queue strict

This command restores the default weighted scheduler mode for each specified queue.
Format
Modes

random-detect

This command is used to enable WRED for the interface as a whole, and is only available when
per-queue WRED activation control is not supported by the device. Specific WRED parameters
are configured using the 'random-detect queue-parms' and the 'random-detect exponential-
weighting-constant' commands.
Format
Modes

no random-detect

This command disables WRED, thereby restoring the default tail drop operation for all queues on
the interface.
Format
Modes
Quality of Service (QoS) Commands
Global Config
Interface Config
cos-queue strict <queue-id-1> [<queue-id-2> ... <queue-
id-n>]
Global Config
Interface Config
no cos-queue strict <queue-id-1> [<queue-id-2> ...
<queue-id-n>]
Global Config
Interface Config
random-detect
Global Config
Interface Config
no random-detect
Global Config
Interface Config
202-10088-01, March 2005
11-43