NETGEAR ProSafe FSM7328S User Manual page 346

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Table 12-3. IS CLI Mapping (continued)
7300S Series L3 Switch
Package
Command
Routing config router vrrp interface
advinterval <slot/port> <vrID>
<seconds>
Routing config router vrrp interface
authdetails <slot/port> <vrID>
<none | simple> [key]
Routing config router vrrp removedetails
<slot/port> <vrID>
Routing config router rtrdiscovery
adminmode <slot/port> <enable |
disable>
Routing config router rtrdiscovery
maxinterval <slot/port> <4-1800>
Routing config router rtrdiscovery
mininterval <slot/port>
<3-maxinterval>
Routing config router rtrdiscovery lifetime
<slot/port> <max-interval-9000>
Routing config router rtrdisocvery address
<slot/port> <ipaddr>
Routing config router rtrdisocvery prefrence
<slot/port> <-2147483648 -
2147483647>
A-16
CLI Command
Mode
Interface
Config
Interface
Config
Interface
Config
Interface
Config
Interface
Config
Interface
Config
Interface
Config
202-10088-01, March 2005
Syntax
ip vrrp <VrID> timers advertise
<1-255>
no ip vrrp <VrID> timers advertise
ip vrrp <VrID> authentication [<key>]
no ip vrrp <VrID> authentication
ip vrrp removedetails <VrID>
ip irdp [{holdtime <maxinterval-9000>
| maxadvertinterval <4-1800> |
minadvertinterval <3-maxinterval> |
preference <-2147483648 -
2147483647> | address <address>}]
no ip irdp
IS CLI Mapping