User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
ip http secure-port
This command is used to set the sslt port where port can be 1-65535 and the default is port 443.
Default
Format
Mode
no ip http secure-port
This command is used to reset the sslt port to the default value.
Format
Mode
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.
Default
Format
Mode
ip http secure-server
This command is used to enable the secure socket layer for secure HTTP.
Default
Format
Mode
no ip http secure-server
This command is used to disable the secure socket layer for secure HTTP.
Format
Mode
9-24
443
ip http secure-port <portid>
Privileged EXEC
no ip http secure-port
Privileged EXEC
SSL3 and TLS1
ip http secure-protocol [SSL3] [TLS1]
Privileged EXEC
disabled
ip http secure-server
Privileged EXEC
ip http secure-server
Privileged EXEC
202-10088-01, March 2005
Security Commands