No Ip Rip Send Version; Hostroutesaccept; No Hostroutesaccept; Split-Horizon - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
no ip rip send version
This command configures the interface to allow RIP control packets of the default version to be
sent.
Format
Mode
hostroutesaccept
This command enables the RIP hostroutesaccept mode.
Default
Format
Mode
no hostroutesaccept
This command disables the RIP hostroutesaccept mode.
Format
Mode
split-horizon
This command sets the RIP split horizon mode.
Default
Format
Mode
no split-horizon
This command sets the default RIP split horizon mode.
Format
Mode
Routing Commands
no ip rip send version
Interface Config
enabled
hostroutesaccept
Router RIP Config
no hostroutesaccept
Router RIP Config
simple
split-horizon {none | simple | poison}
Router RIP Config
no split-horizon
Router RIP Config
202-10088-01, March 2005
10-27
Advertisement
Table of Contents
