User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
no shutdown
This command enables a port.
Format
Mode
shutdown all
This command disables all ports.
Default
Format
Mode
no shutdown all
This command enables all ports.
Format
Mode
speed
This command sets the speed and duplex setting for the interface.
Format
Mode
Acceptable values are:
100h
100f
10h
10f
speed all
This command sets the speed and duplex setting for all interfaces.
8-42
no shutdown
Interface Config
enabled
shutdown all
Global Config
no shutdown all
Global Config
speed {<100 | 10> <half-duplex | full-duplex>}
Interface Config
100BASE-T half duplex
100BASE-T full duplex
10BASE-T half duplex
10BASE-T full duplex
202-10088-01, March 2005
Switching Commands