Vlan Makestatic; Vlan Name; No Vlan Name; Vlan Participation - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to
a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-4094.
Format
Mode
vlan name
Default
Format
Mode
no vlan name
Format
Mode
vlan participation
This command configures the degree of participation for a specific interface in a VLAN. The ID is
a valid VLAN identification number, and the interface is a valid interface number
Format
Mode
Participation options are:
include
8-50
vlan makestatic <2-4094>
VLAN database
This command changes the name of a VLAN. The name is an
alphanumeric string of up to 32 characters, and the ID is a valid
VLAN identification number. ID range is 1-4094.
The name for VLAN ID 1 is always Default. The name for other
VLANs is defaulted to a blank string.
vlan name <2-4094> <name>
VLAN database
This command sets the name of a VLAN to a blank string. The
VLAN ID is a valid VLAN identification number. ID range is 1-
4094.
no vlan name <2-4094>
VLAN database
vlan participation <exclude | include | auto> <1-4094>
Interface Config
The interface is always a member of this VLAN. This is equiva-
lent to registration fixed.
202-10088-01, March 2005
.
Switching Commands
Advertisement
Table of Contents
