User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Associated FIDs
Associated VLANs
show spanning-tree summary
This command displays spanning tree settings and parameters for the switch. The following details
are displayed on execution of the command.
Format
Mode
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w,
Configuration Name
Configuration Revision Level Identifier used to identify the configuration currently
Configuration Digest Key Identifier used to identify the configuration currently being
MST Instances
show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree instance.
The <vlanid> corresponds to an existing VLAN ID.
Format
Mode
VLAN Identifier
Associated Instance
8-132
List of forwarding database identifiers associated with this
instance.
List of VLAN IDs associated with this instance.
show spanning-tree summary
Privileged EXEC and User EXEC
or IEEE 802.1d) based upon the Force Protocol Version parame-
ter
Identifier used to identify the configuration currently being used.
being used.
used.
List of all multiple spanning tree instances configured on the
switch
show spanning-tree vlan <vlanid>
Privileged EXEC and User EXEC
Identifier for the associated multiple spanning tree instance or
"CST" if associated with the common and internal spanning tree
202-10088-01, March 2005
Switching Commands