User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Format
Mode
dot1x initialize
This command begins the initialization sequence on the specified port. This command is only valid
if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be
returned.
Format
Mode
dot1x login
This command assigns the specified authentication login list to the specified user for 802.1x port
security. The <user> parameter must be a configured user and the <listname> parameter must be a
configured authentication login list.
Format
Mode
dot1x max-req
This command sets the maximum number of times the authenticator state machine on this port will
transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. The <count>
value must be in the range 1 - 10.
Default
Format
Mode
no dot1x max-req
This command sets the maximum number of times the authenticator state machine on this port will
transmit an EAPOL EAP Request/Identity frame before timing out the supplicant.
Format
Mode
Security Commands
dot1x defaultlogin <listname>
Global Config
dot1x initialize <slot/port>
Privileged EXEC
dot1x login <user> <listname>
Global Config
2
dot1x max-req <count>
Interface Config
no dot1x max-req
Interface Config
202-10088-01, March 2005
9-7