Network Mac-Type; No Network Mac-Type; Network Parms - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
• Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered
(b'0') or locally administered (b'1').
• Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual
address (b'0') or a group address (b'1').
• The second character, of the twelve character macaddr, must be 2, 6, A or E.
A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
Format
Mode

network mac-type

This command specifies whether the burned in MAC address or the locally-administered MAC
address is used.
Default
Format
Mode

no network mac-type

This command resets the value of MAC address to its default.
Format
Mode

network parms

This command sets the IP Address, subnet mask and gateway of the router. The IP Address and the
gateway must be on the same subnet.
Format
Mode
8-20
network mac-address <macaddr>
Privileged EXEC
burnedin
network mac-type {local | burnedin}
Privileged EXEC
no network mac-type
Privileged EXEC
network parms <ipaddr> <netmask> [<gateway>]
Privileged EXEC
202-10088-01, March 2005
Switching Commands