User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Table 12-3.
IS CLI Mapping (continued)
7300S Series L3 Switch
Package
Command
Switching
config port physicalmode <slot/port
| all> <100h | 100f | 10h | 10f>
Switching
config port lacpmode <slot/port/all>
<enable/disable>
Switching
config port autoneg <slot/port/all>
<enable/disable>
Switching
config lag create <name>
Switching
config lag addport <logical slot/
port> <slot/port>
Switching
config lag deleteport <logical slot/
port> <slot/port | all>
IS CLI Mapping
CLI Command
Mode
Global
Config
Global
Config
Interface
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Global
Config
Interface
Config
Interface
Config
202-10088-01, March 2005
Syntax
snmp trap link- status all
no snmp trap link- status all
speed {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
speed all {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
port lacpmode
no port lacpmode
port lacpmode all
no port lacpmode all
auto-negotiate
no auto-negotiate
auto-negotiate all
no auto-negotiate all
port-channel <name>
addport <logical slot/port>
deleteport <logical slot/port>
A-31