No Ip Address; Ip Route; No Ip Route; Ip Route Default - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Mode

no ip address

This command deletes an IP address from an interface.
The value for <ipaddr> is the IP Address of the interface.
The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask
of the interface.
Format
Mode

ip route

This command configures a static route. The <ip_addr> is a valid ip address. The <subnet_mask>
is a valid subnet mask. The <nextHopRtr> is a valid IP address of the next hop router. The
<preference> is an integer value from 1 to 255.
Default
Format
Mode

no ip route

This command deletes all next hops to a destination static route. If the optional <nextHopRtr>
parameter is designated, the next hop is deleted and if the optional preference value is designated,
the preference value of the static route is reset to its default,
Format
Mode

ip route default

This command configures the default route. The value for <nextHopRtr> is a valid IP address of
the next hop router. The <preference> is an integer value from 1 to 255
Default
10-8
Interface Config
no ip address <ipaddr> <subnetmask> [secondary]
Interface Config
preference - 1
ip route <ip_addr> <subnet_mask> <nextHopRtr> [<pref-
erence>]
Global Config
no ip route <ip_addr> <subnet_mask> [{<nextHopRtr> |
<preference>}]
Global Config
preference - 1
202-10088-01, March 2005
Routing Commands