Show Arp Switch; Show Eventlog; Show Hardware - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

show arp switch

This command displays connectivity between the switch and other devices. The Address
Resolution Protocol (ARP) cache identifies the MAC addresses of the IP stations communicating
with the switch.
Format
Mode
MAC Address
IP Address
The IP address assigned to each interface.
slot/port

show eventlog

This command displays the event log, which contains error messages from the system. The event
log is not cleared on a system reset.
Format
Mode
File
Line
Task Id
Code
Time
Note: Event log information is retained across a switch reset.

show hardware

This command displays inventory information for the switch.
Format
Mode
Switch Description
8-2
show arp switch
Privileged EXEC
A unicast MAC address for which the switch has forwarding and/
or filtering information. The format is 6 two-digit hexadecimal
numbers that are separated by colons, for example
01:23:45:67:89:AB
Valid slot and port number separated by forward slashes.
show eventlog
Privileged EXEC
The file in which the event originated.
The line number of the event
The task ID of the event.
The event code.
The time this event occurred.
show hardware
Privileged EXEC
Text used to identify the product name of this switch.
202-10088-01, March 2005
Switching Commands