User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Format
Mode
no dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state machine on
this port to the default values. Depending on the token used, the corresponding default values are
set.
Format
Mode
dot1x user
This command adds the specified user to the list of users with access to the specified port or all
ports. The <user> parameter must be a configured user.
Format
Mode
no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
Format
Mode
show radius accounting
This command is used to display the configured RADIUS accounting mode, accounting server and
the statistics for the configured accounting server.
Format
Mode
If the optional token 'statistics <ipaddr>' is not included, then only the accounting mode and
the RADIUS accounting server details are displayed.
Mode
Security Commands
dot1x timeout {{reauth-period <seconds>} | {quiet-
period <seconds>} | {tx-period <seconds>} | {supp-tim-
eout <seconds>} | {server-timeout <seconds>}}
Interface Config
no dot1x timeout {reauth-period | quiet-period | tx-
period | supp-timeout | server-timeout}
Interface Config
dot1x user <user> {<slot/port> | all}
Global Config
no dot1x user <user> {
Global Config
show radius accounting [statistics <ipaddr>]
Privileged EXEC
Enabled or disabled
202-10088-01, March 2005
<
>
slot/port
| all}
9-11