Show Classofservice Ip-Precedence-Mapping; Show Classofservice Trust; Show Interfaces Cos-Queue - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
show classofservice ip-precedence-mapping
This command displays the current IP Precedence mapping to internal traffic classes for a specific
interface. The slot/port parameter is optional and is only valid on platforms that support
independent per-port class of service mappings. If specified, the IP Precedence mapping table of
the interface is displayed. If omitted, the most recent global configuration settings are displayed.
Format
Mode
The following information is repeated for each user priority.
IP Precedence
Traffic Class
show classofservice trust
This command displays the current trust mode setting for a specific interface. The slot/port
parameter is optional and is only valid on platforms that support independent per-port class of
service mappings. If specified, the port trust mode of the interface is displayed. If omitted, the
port trust mode of each interface in the system is shown. If the platform does not support
independent per-port class of service mappings, the output represents the system-wide port trust
mode used for all interfaces.
Format
Mode
Non-IP Traffic
Untrusted Traffic Class
show interfaces cos-queue
This command displays the class-of-service queue configuration for the specified interface. The
slot/port parameter is optional and is only valid on platforms that support independent per-port
class of service mappings. If specified, the class-of-service queue configuration of the interface is
displayed. If omitted, the most recent global configuration settings are displayed.
Format
Mode
11-46
show classofservice ip-precedence-mapping [slot/port]
Privileged EXEC
The IP Precedence value.
The traffic class internal queue identifier to which the IP Prece-
dence value is mapped.
show classofservice trust [slot/port]
Privileged EXEC
ClassThe traffic class used for non-IP traffic. This is only dis-
played when the COS trust mode is set to either 'trust ip-dscp' or
'trust ip-precedence'.
The traffic class used for all untrusted traffic. This is only dis-
played when the COS trust mode is set to 'untrusted'.
show interfaces cos-queue [slot/port]
Privileged EXEC
202-10088-01, March 2005
Quality of Service (QoS) Commands
Advertisement
Table of Contents
