User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
Mode
netbios-name-server
This command configures NetBIOS Windows Internet Naming Service (WINS) name servers that
are available to DHCP clients.
One IP address is required, although one can specify up to eight addresses in one command line.
Servers are listed in order of preference (address1 is the most preferred server, address2 is the next
most preferred server, and so on).
Default
Format
Mode
no netbios-name-server
This command removes the NetBIOS name server list.
Format
Mode
netbios-node-type
The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration
Protocol (DHCP) clients.type Specifies the NetBIOS node type. Valid types are:
• b-node—Broadcast
• p-node—Peer-to-peer
• m-node—Mixed
• h-node—Hybrid (recommended)
Default
Switching Commands
no ip dhcp conflict logging
Global Config
none
netbios-name-server <address>
[<address2>...<address8>]
DHCP Pool Config
no netbios-name-server
DHCP Pool Config
none
202-10088-01, March 2005
8-89