No Spanning-Tree Bpdumigrationcheck; Show Spanning-Tree - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

no spanning-tree bpdumigrationcheck

This command disables BPDU migration check on a given interface. The all option disables
BPDU migration check on all interfaces.
Format
Mode

show spanning-tree

This command displays spanning tree settings for the common and internal spanning tree, when
the optional parameter "brief" is not included in the command. The following details are
displayed.
Format
Modes
Bridge Priority
Bridge Identifier
Time Since Topology Change The time in seconds since the topology last changed.
Topology Change Count Number of times the topology has changed.
Topology Change in progress
Designated Root
Root Path Cost
Root Port Identifier
Bridge Max Age
Bridge Forwarding Delay Specifies the time spent in "Listening and Learning" mode
Hello Time
Bridge Hold Time
Switching Commands
no spanning-tree bpdumigrationcheck {<slot/port> |
all}
Global Config
show spanning-tree <brief>
Privileged EXEC
User EXEC
Specifies the bridge priority for the spanning tree.
The bridge identifier for the selected instance.
Boolean value of the Topology Change parameter for the switch indi-
cating if a topology change is in progress on any port assigned to the common
and internal spanning tree.
The bridge identifier of the root bridge. It is derived from the bridge priority and
the base MAC address of the bridge.
Value of the Root Path Cost parameter for the common and internal spanning
tree.
Port to access the Designated Root.
Specifies the bridge maximum age for the spanning tree.
before forwarding packets. Bridge Forwarding Delay must be
greater or equal to "(Bridge Max Age/2) + 1". The time range is
from 4 seconds to 30 seconds. The default value is 15.
Configured value of the parameter for common spanning tree.
Minimum time between transmission of Configuration Bridge Protocol Data
Units (BPDUs)
202-10088-01, March 2005
8-127