Cli Command Logging; Logging Cli-Command; No Logging Cli-Command; Configuration Scripting - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

CLI Command Logging

This section provides a detailed explanation of the CLI Command Logging commands.

logging cli-command

This command enables the CLI command Logging feature.The Command Logging component
enables the software to log all Command Line Interface (CLI) commands issued on the system.
Default
Format
Mode

no logging cli-command

Format
Mode

Configuration Scripting

Configuration Scripting allows the user to generate text-formatted script files representing the
current configuration. These configuration script files can be uploaded to a PC and edited,
downloaded to the system and applied to the system. Configuration scripts can be applied to one or
more switches with no/minor modifications.
Use the
show running-config
running configuration into a script. Use the
the configuration script to/from the switch.
Note:
• The file extension must be ".scr".
• A maximum of ten scripts are allowed on the switch.
• The combined size of all script files on the switch shall not exceed 500 KB.
8-64
enabled
logging cli-command
Global Config
no logging cli-command
Global Config
command (See "show running-config" on page 66.) to capture the
command (See "copy" on page 62. ) to transfer
copy
202-10088-01, March 2005
Switching Commands