No Port-Channel Linktrap; Port-Channel Name; Show Port-Channel Brief - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Default
Format
Mode

no port-channel linktrap

This command disables link trap notifications for the port-channel (LAG). The interface is a
logical unit, slot and port slot and port for a configured port-channel. The option
configured port-channel with the same administrative mode setting.
Format
Mode

port-channel name

This command defines a name for the port-channel (LAG). The interface is a logical slot/port for a
configured port-channel, and name is an alphanumeric string up to 15 characters. This command is
used to modify the name that was associated with the port-channel when it was created.
Format
Mode

show port-channel brief

This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
Format
Mode
Static Capability
For each port-channel the following information is displayed:
Name
Link State
Mbr Ports
8-116
enabled
port-channel linktrap {<logical slot/port> | all}
Global Config
no port-channel linktrap {<logical slot/port> | all]
GlobalConfig
port-channel name {<logical slot/port> | all | <name>}
Global Config
show port-channel brief
Privileged EXEC and User EXEC
This field displays whether or not the device has static capability
enabled.
This field displays the name of the port-channel.
This field indicates whether the link is up or down.
This field lists the ports that are members of this port-channel, in
<slot/port> notation.
202-10088-01, March 2005
sets every
all
Switching Commands