Script Validate - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

18.5.5 script validate

This command validates a script file by parsing each line in the script file where
<scriptname>
used as a tool for script development. Validation identifies potential problems. It might not
identify all problems with a given script on any given device.
Format
Mode
18-30
is the name of the script to validate.The validate option is intended to be
script validate <scriptname>
Global Config
v1.0, March 2006
System Maintenance Commands