Arp Dynamicrenew; No Arp Dynamicrenew; Arp Purge; Arp Resptime - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

arp dynamicrenew

This command enables ARP component to automatically renew ARP entries of type dynamic
when they age out.
Format
Mode

no arp dynamicrenew

This command disables ARP component from automatically renewing ARP entries of type
dynamic when they age out.
Format
Mode

arp purge

This command causes the specified IP address to be removed from the ARP cache. Only entries of
type dynamic or gateway are affected by this command.
Format
Mode

arp resptime

This command configures the ARP request response timeout.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry response
timeout time in seconds. The range for <seconds> is between 1-10 seconds.
Default
Format
Mode

no arp resptime

This command configures the default ARP request response timeout.
Format
Mode
Routing Commands
arp dynamicrenew
Privileged Exec
no arp dynamicrenew
Privileged Exec
arp purge <ipaddr>
Privileged EXEC
l
arp resptime <1-10>
Global Config
no arp resptime
Global Config
202-10088-01, March 2005
10-3