Show Ip Route Preferences; Show Ip Stats - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Mode
Network Address
Subnet Mask
Protocol
For each Next Hop
Next Hop Interface
Next Hop IP Address
Preference
Metric

show ip route preferences

This command displays detailed information about the route preferences. Route preferences are
used in determining the best route. Lower router preference values are preferred over higher router
preference values.
Format
Mode
Local
Static
RIP

show ip stats

This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed. This command takes no options.
Format
Mode
10-14
Privileged EXEC
Is a valid network address identifying the network on the speci-
fied interface.
Is a mask of the network and host portion of the IP address for the
attached network.
Tells which protocol added the specified route. The possibilities
are: local, static, or RIP.
The outgoing router interface to use when forwarding traffic to
the next destination.
The outgoing router IP address to use when forwarding traffic to
the next router (if any) in the path toward the destination.
The metric value that is used for this route entry.
show ip route preferences
Privileged EXEC and User EXEC
This field displays the local route preference value.
This field displays the static route preference value.
This field displays the RIP route preference value.
show ip stats
Privileged EXEC and User EXEC
202-10088-01, March 2005
Routing Commands