Show Interfaces Random-Detect - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Interface
Intf Shaping Rate
Queue Mgmt Type
WRED Decay Exponent
The following information is repeated for each queue on the interface.
Queue IdQueue identification number
Minimum Bandwidth
Maximum Bandwidth
Scheduler Type
Queue Mgmt Type

show interfaces random-detect

This command displays the weighted random early discard (WRED) configuration for each
supported drop precedence level of each queue for the specified interface. The slot/port parameter
is optional and is only valid on platforms that support independent per-port class of service
mappings. If specified, the class-of-service WRED configuration of the interface is displayed. If
omitted, the most recent global configuration settings are displayed.
Format
Mode
Quality of Service (QoS) Commands
This displays the slot/port of the interface. If displaying the glo-
bal configuration, this output line is replaced with a Global Con-
fig indication.
The maximum transmission bandwidth limit for the interface as a
whole. It is independent of any per-queue maximum bandwidth
value(s) in effect for the interface. This is a configured value.
The queue depth management technique used for all queues on
this interface, either tail drop or weighted random early discard
(WRED). This is a configured value.
The weighted random early discard (WRED) average queue
length calculation decay exponent. This is a configured value.
An interface supports n queues numbered 0 to (n-1).
The specific n value is platform dependent.
The minimum transmission bandwidth guarantee for the queue,
expressed as a percentage. A value of 0 means bandwidth is not
guaranteed and the queue operates using best-effort. This is a
configured value.
The maximum transmission bandwidth limit for the queue,
expressed as a percentage. A value of 0 means no upper limit is
enforced, so the queue may use any or all of the available band-
width of the interface. This is a configured value.
Indicates whether this queue is scheduled for transmission using a
strict priority or a weighted scheme. This is a configured value.
The queue depth management technique used for this queue,
either tail drop or weighted random early discard (WRED). This
is a configured value.
show interfaces random-detect [slot/port]
Privileged EXEC
202-10088-01, March 2005
11-47