Show Sntp Client; Show Sntp Server - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Multicast Count

show sntp client

This command is used to display SNTP client settings.
Format
Mode
Client Supported Modes
SNTP Version
Port
Client Mode:
Poll Interval
Poll Timeout
Poll Retry

show sntp server

This command is used to display SNTP server settings and configured servers.
Format
Mode
Server IP Address
Server Type
Server Stratum
Server Reference ID
Server Mode
Server Max Entries
Server Current Entries Total number of SNTP configured.
For each configured server:
IP Address
8-76
Current number of unsolicited multicast messages that have been
received and processed by the SNTP client since last
reboot
show sntp client
Privileged Exec
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
The highest SNTP version the client supports
SNTP Client Port
Configured SNTP Client Mode
Poll interval value for SNTP clients in seconds as a power of two.
Poll timeout value in seconds for SNTP clients.
Poll retry value for SNTP clients.
show sntp server
Privileged Exec
IP Address of configured SNTP Server
Address Type of Server.
Claimed stratum of the server for the last received valid packet.
Reference clock identifier of the server for the last received valid
packet.
SNTP Server mode.
Total number of SNTP Servers allowed.
IP Address of configured SNTP Server.
202-10088-01, March 2005
Switching Commands