No Auto-Negotiate; Auto-Negotiate All; No Auto-Negotiate All; Deleteport (Interface Config) - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Mode

no auto-negotiate

This command disables automatic negotiation on a port.
Note: Automatic sensing is disabled when automatic negotiation is disabled.
Format
Mode

auto-negotiate all

This command enables automatic negotiation on all ports. The default value is enable.
Format
Mode

no auto-negotiate all

This command disables automatic negotiation on all ports.
Format
Mode

deleteport (Interface Config)

This command deletes the port from the port-channel (LAG). The interface is a
logical unit, slot and port slot and port number of a configured port-channel.
Format
Mode

deleteport (Global Config)

This command deletes all configured ports from the port-channel (LAG). The
interface is a logical unit, slot and port slot and port number of a configured port-
channel.
Format
Mode
Switching Commands
Interface Config
no auto-negotiate
Interface Config
auto-negotiate all
Global Config
no auto-negotiate all
Global Config
deleteport <logical slot/port>
Interface Config
deleteport {<logical slot/port> | all}
Global Config
202-10088-01, March 2005
8-37