Show Port-Security; Show Port-Security Dynamic; Show Port-Security Static - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
show port-security
This command displays the port-security settings for the entire system.
Format
Mode
Admin Mode
show port-security
This command displays the port-security settings for a particular interface or all interfaces.
Format
Mode
Interface Admin Mode Port Locking mode for the Interface.
Dynamic Limit
Static Limit
Violation Trap Mode
show port-security dynamic
This command displays the dynamically locked MAC addresses for port.
Format
Mode
MAC Address
show port-security static
This command displays the statically locked MAC addresses for port.
Format
Mode
MAC Address
9-4
show port-security
Privileged EXEC
Port Locking mode for the entire system
show port-security <interface | all>
Privileged EXEC
Maximum dynamically allocated MAC Addresses.
Maximum statically allocated MAC Addresses.
Whether violation traps are enabled.
show port-security dynamic <interface>
Privileged EXEC
MAC Address of dynamically locked MAC.
show port-security static <interface>
Privileged EXEC
MAC Address of statically locked MAC.
202-10088-01, March 2005
Security Commands
Advertisement
Table of Contents
