User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
VLAN
Interface(s)
show storm-control
This command displays switch configuration information.
Format
Mode
Broadcast Storm Recovery Mode May be enabled or disabled. The factory default is
802.3x Flow Control Mode May be enabled or disabled. The factory default is disabled.
Virtual LAN (VLAN) Commands
vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-4094.
Format
Mode
no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is
reserved for the default VLAN). VLAN range is 2-4094.
Format
Mode
8-48
This field indicates the VLAN associated with this Protocol Group.
This field lists the slot/port interface(s) that are associated with this Protocol
Group.
show storm-control
Privileged EXEC
disabled.
vlan <2-4094>
VLAN database
no vlan <2-4094>
VLAN database
202-10088-01, March 2005
Switching Commands