Ip Arp Inspection Validate; Ip Arp Inspection Vlan Logging - NETGEAR GSM7228PS Cli Manual

Format
no ip arp inspection vlan vlan-list
Mode Global Config

ip arp inspection validate

Use this command to enable additional validation checks like source-mac validation, destination-
mac validation, and ip address validation on the received ARP packets. Each command overrides
the configuration of the previous command. For example, if a command enables src-mac and dst-
mac validations, and a second command enables IP validation only, the src-mac and dst-mac
validations are disabled as a result of the second command.
Default
disabled
Format
ip arp inspection validate {[src-mac] [dst-mac] [ip]}
Mode Global Config
no ip arp inspection validate
Use this command to disable the additional validation checks on the received ARP packets.
Format
no ip arp inspection validate {[src-mac] [dst-mac] [ip]}
Mode Global Config

ip arp inspection vlan logging

Use this command to enable logging of invalid ARP packets on a list of comma-separated VLAN
ranges.
Default
enabled
Format
ip arp inspection vlan vlan-list logging
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-132