User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
•
Chapter 10, "Routing Commands"
•
Chapter 11, "Quality of Service (QoS) Commands"
•
Chapter 12, "Managing Switch Stacks"
Note: Refer to the release notes for the 7000 Series L3 Managed Switch Software application
level code. The release notes detail the platform specific functionality of the Switching, Routing,
SNMP, Config, Management, and Bandwidth Provisioning packages.
Typographical Conventions
This guide uses the following typographical conventions:
Table 1.
Typographical conventions
italics
bold
[Enter]
[Ctrl]+C
S
C
MALL
APS
Special Message Formats
This guide uses the following formats to highlight special messages:
Note: This format is used to highlight information of importance or special interest.
This manual is written for the 7300S Series L3 Switch according to these specifications:
Table 1-1.
Manual Specifications
Product Version
Manual Publication Date
1-2
describes the Routing commands.
describes the switch stacking.
Emphasis.
User input.
Named keys in text are shown enclosed in square brackets. The notation [Enter]
is used for the Enter key and the Return key.
Two or more keys that must be pressed simultaneously are shown in text linked
with a plus (+) sign.
DOS file and directory names.
NETGEAR 7300S Series Layer 3 Managed Switch
March 2005
202-10088-01, March 2005
describes the QOS commands.
About This Guide