Protocol Vlan Group; No Protocol Vlan Group; Protocol Vlan Group All; No Protocol Vlan Group All - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

protocol vlan group

This command adds the physical <
may have more than one interface associated with it. Each interface and protocol combination can only be associated
with one group. If adding an interface to a group causes any conflicts with protocols currently associated with the group,
this command will fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default
Format
Mode

no protocol vlan group

This command removes the <
all
If < is selected, all ports will be removed from this protocol group.
>
Format
Mode

protocol vlan group all

This command adds all physical interfaces to the protocol-based VLAN identified by <
more than one interface associated with it. Each interface and protocol combination can only be associated with one
group. If adding an interface to a group causes any conflicts with protocols currently associated with the group, this
command will fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default
Format
Mode

no protocol vlan group all

This command removes all interfaces from this protocol-based VLAN group that is identified by
this <groupid>.
Switching Commands
slot/port
interface to the protocol-based VLAN identified by <
>
none
protocol vlan group <groupid>
Interface Config
interface
from this protocol-based VLAN group that is identified by this <
>
no protocol vlan group <groupid>
Interface Config
none
protocol vlan group all <groupid>
Global Config
202-10088-01, March 2005
groupid
. A group
>
groupid
groupid
. A group may have
>
.
>
8-55