Logging Host Remove; Logging Port; No Logging Port; Logging Syslog - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
logging host remove
This command disables logging to host. See 'show logging hosts' for a list of host indices.
Format
Mode
logging port
This command sets the local port number of the LOG client for logging messages. The <portid>
can be in the range from 1 to 65535.
Default
Format
Mode
no logging port
This command resets the local logging port to the defalt.
Format
Mode
Global Config
logging syslog
This command enables syslog logging.
Default
Format
Mode
no logging syslog
This command disables syslog logging.
Format
Mode
Switching Commands
logging host remove <hostindex>
Global Config
514
logging port <portid>
Global Config
no logging port
disabled; local0
logging syslog
Global Config
no logging syslog
Global Config
202-10088-01, March 2005
8-69
Advertisement
Table of Contents
