Command Line Interface Structure; Cli Command Format; Command - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
The Command Line Interface (CLI) syntax, conventions and terminology are described in this
section. Each CLI command is illustrated using the structure outlined below.
CLI Command Format
Commands are followed by values, parameters, or both.
Example 1
network parms <ipaddr> <netmask> [<gateway>]
•
network parms is the command name.
•
<ipaddr> <netmask> are the required values for the command.
•
[<gateway>] is the optional value for the command.
Example 2
snmp-server location <loc>
•
snmp-server location is the command name.
•
<loc> is the required parameter for the command.
Example 3
clear vlan
•
clear vlan is the command name.
Command
The text in bold, non-italic font must be typed exactly as shown.
Command Line Interface Structure
Command Line Interface Structure
202-10088-01, March 2005
Chapter 5
5-1
Advertisement
Table of Contents
