Garp Multicast Registration Protocol (Gmrp) Commands; Set Gmrp Adminmode; No Set Gmrp Adminmode - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Port GMRP Mode

GARP Multicast Registration Protocol (GMRP) Commands

This chapter provides a detailed explanation of the GMRP commands. The commands are divided
into two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.

set gmrp adminmode

This command enables GARP Multicast Registration Protocol (GMRP) on the system. The default
value is disable.
Format
Mode

no set gmrp adminmode

This command disables GARP Multicast Registration Protocol (GMRP) on the system.
Format
Mode
8-102
instance of this timer on a per-Port, per-GARP participant basis. The Leave All
Period Timer is set to a random value in the range of LeaveAllTime to
1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60
seconds). The factory default is 1000 centiseconds (10 seconds). The finest
granularity of specification is 1 centisecond (0.01 seconds).
Indicates the GMRP administrative mode for the port. It may be enabled or dis-
abled. If this parameter is disabled, Join Time, Leave Time and Leave All Time
have no effect. The factory default is disabled.
set gmrp adminmode
Privileged EXEC
no set gmrp adminmode
Privileged EXEC
202-10088-01, March 2005
Switching Commands