Dot1X Port-Control; No Dot1X Port-Control; Dot1X Port-Control All - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

dot1x port-control

This command sets the authentication mode to be used on the specified port. . The control mode
may be one of the following.
force-unauthorized: The authenticator PAE unconditionally sets the controlled port to
unauthorized.
force-authorized: The authenticator PAE unconditionally sets the controlled port to authorized.
auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
Default
Format
Mode

no dot1x port-control

This command sets the authentication mode to be used on the specified port to 'auto'.
Format
Mode

dot1x port-control All

This command sets the authentication mode to be used on all ports. The control mode may be one
of the following.
force-unauthorized: The authenticator PAE unconditionally sets the controlled port to
unauthorized.
force-authorized: The authenticator PAE unconditionally sets the controlled port to authorized.
auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
Default
Format
9-8
auto
dot1x port-control {force-unauthorized |
authorized | auto}
Interface Config
no dot1x port-control
Interface Config
auto
dot1x port-control all {force-unauthorized | force-
authorized | auto}
202-10088-01, March 2005
force-
Security Commands