Show Port-Channel - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Active Ports

show port-channel

This command displays an overview of all port-channels (LAGs) on the switch.
Format
Mode
Logical slot/port
Name
Link State
Admin Mode
Link Trap Mode
STP Mode
Mbr Ports
Port Speed
Type
Active Ports
This field lists the ports that are actively participating in the port-channel
(LAG).
Switching Commands
This field lists the ports that are actively participating in this port-
channel.
show port-channel {<logical slot/port> | all}
Privileged EXEC
Valid slot and port number separated by forward slashes.
The name of this port-channel (LAG). You may enter any string
of up to 15 alphanumeric characters.
Indicates whether the Link is up or down.
May be enabled or disabled. The factory default is enabled.
This object determines whether or not to send a trap when link
status changes. The factory default is enabled.
The Spanning Tree Protocol Administrative Mode associated
with the port or port-channel (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.
A listing of the ports that are members of this port-channel
(LAG), in slot/port notation. There can be a maximum of eight
ports assigned to a given port-channel (LAG).
Speed of the port-channel port.
This field displays the status designating whether a particular
port-channel (LAG) is statically or dynamically maintained. The
possible values of this field are Static, indicating that the port-
channel is statically maintained; and Dynamic, indicating that the
port-channel is dynamically maintained.
202-10088-01, March 2005
8-117