User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Random Drop Maximum Threshold This field displays the RED maximum thresh-
Random Drop Maximum Drop Probability This field displays the RED maximum drop
Random Drop Sampling Rate This field displays the RED sampling rate.This is not dis-
Random Drop Decay Exponent This field displays the RED decay exponent.This is not
If the Policy Name is not specified this command displays a list of all defined DiffServ policies. The
following fields are displayed:
Policy Name
Policy Type
Class Members
show diffserv service
This command displays policy service information for the specified interface and direction. The
slot/port
parameter specifies a valid slot/port number for the system. The direction parameter
<
>
indicates the interface direction of interest.
Format
Mode
DiffServ Admin Mode
Interface
Direction
Operational Status
Policy Name
11-36
old.This is not displayed if the queue depth management scheme
is not RED.
probability.This is not displayed if the queue depth management
scheme is not RED.
played if the queue depth management scheme is not RED.
displayed if the queue depth management scheme is not RED.
The name of this policy. (Note that the order in which the policies
are displayed is not necessarily the same order in which they were
created.)
The policy type, namely whether it is an inbound or outbound
policy definition.
List of all class names associated with this policy.
show diffserv service <slot/port> <in | out>
Privileged EXEC
The current setting of the DiffServ administrative mode. An
attached policy is only in effect on an interface while DiffServ is
in an enabled mode.
Valid slot and port number separated by forward slashes.
The traffic direction of this interface service, either in or out
The current operational status of this DiffServ service interface.
The name of the policy attached to the interface in the indicated
direction.
202-10088-01, March 2005
Quality of Service (QoS) Commands