Clear Ip Dhcp Binding; Clear Ip Dhcp Server Statistics; Clear Ip Dhcp Conflict; Provisioning (Ieee 802.1P) Commands - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

clear ip dhcp binding

This command deletes an automatic address binding from the DHCP server database. If "*" is
specified, the bindings corresponding to all the addresses are deleted. <address> is a valid IP
address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default
Format
Mode

clear ip dhcp server statistics

This command clears DHCP server statistics counters.
Format
Mode

clear ip dhcp conflict

The command is used to clear an address conflict from the DHCP Server database. The server
detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is used
as the address parameter.
Default
Format
Mode

Provisioning (IEEE 802.1p) Commands

This chapter provides a detailed explanation of the Provisioning commands. The commands are
divided into two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
8-94
none
clear ip dhcp binding {address | *}
Privileged EXEC
clear ip dhcp server statistics
Privileged EXEC
none
clear ip dhcp conflict {<address> | *}
Privileged EXEC
202-10088-01, March 2005
Switching Commands