User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
The current value for this function is displayed under "show ip interface" labeled as "Routing
Mode".
Default
Format
Mode
no routing
This command disables routing for an interface.
The current value for this function is displayed under "show ip interface" labeled as "Routing
Mode".
Format
Mode
ip routing
This command enables the IP Router Admin Mode for the master switch.
Format
Mode
no ip routing
This command disables the IP Router Admin Mode for the master switch.
Format
Mode
ip address
This command configures an IP address on an interface. The IP address may be a secondary IP
address.
The value for <ipaddr> is the IP Address of the interface.
The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask
of the interface. This changes the label "IP address" in "show ip interface."
Format
Routing Commands
disabled
routing
Interface Config
no routing
Interface Config
ip routing
Global Config
no ip routing
Global Config
ip address <ipaddr> <subnetmask> [secondary]
202-10088-01, March 2005
10-7