NETGEAR ProSafe FSM7328S User Manual page 61

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Table 6-9. Quick Start up Factory Defaults
Command
copy system:running-config
nvram:startup-config
reload OR Cold Boot the Switch
Quick Start up
Details
Enter yes when the prompt pops up that asks if you want to save
the configurations made to the switch.
Enter yes when the prompt pops up that asks if you want to reset
the system.
This is the users choice either reset the switch or cold boot the
switch, both work effectively.
202-10088-01, March 2005
6-7