NETGEAR ProSafe FSM7328S User Manual page 331

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
This chapter illustrates the mapping between CLI commands and the previous 7300S Series L3
Switch commands. The Package column indicates the 7300S Series L3 Switch package in which
the command is located.
Table 12-3. IS CLI Mapping
7300S Series L3 Switch
Package
Command
QOS show acl detailed <aclid>
QOS show acl summary
QOS config acl create <aclid>
QOS config acl delete <aclid>
QOS config acl rule create <aclid>
<rulenum>
QOS config acl rule delete <aclid>
<rulenum>
IS CLI Mapping
CLI Command
Mode
Privileged
EXEC
Privileged
EXEC and
User
EXEC
Global
Config
Global
Config
202-10088-01, March 2005
Appendix A
IS CLI Mapping
Syntax
show ip access-lists [<1-199>]
access-list {(<1-99> {deny | permit}
<srcip> <srcmask>) | ( {<100-199>
{deny | permit} {every | {{icmp | igmp |
ip | tcp | udp | <number>} <srcip>
<srcmask> [{eq {<0-65535> |
<portkey>} | range <startport>
<endport>}] <dstip> <dstmask> [{eq
{<0-65535> | <portkey>} | range
<startport> <endport>}] {[precedence
<precedence>] | [tos <tos>
<tosmask>] | [dscp <dscp>]}}}})}
no access-list {<1-99> | <100-199>}
A-1