Garp Vlan Registration Protocol (Gvrp) Commands; Set Gvrp Adminmode; No Set Gvrp Adminmode; Set Gvrp Interfacemode - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

GARP VLAN Registration Protocol (GVRP) Commands

This chapter provides a detailed explanation of the GVRP commands. The commands are divided
into two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.

set gvrp adminmode

This command enables GVRP.
Default
Format
Mode

no set gvrp adminmode

This command disables GVRP.
Format
Mode

set gvrp interfacemode

This command enables GVRP (GARP VLAN Registration Protocol) for a specific port.
Default
Format
Mode

no set gvrp interfacemode

This command disables GVRP (GARP VLAN Registration Protocol) for a specific port. If GVRP
is disabled, Join Time, Leave Time and Leave All Time have no effect.
Format
Mode
8-100
disabled
set gvrp adminmode
Privileged EXEC
no set gvrp adminmode
Privileged EXEC
disabled
set gvrp interfacemode
Interface Config
no set gvrp interfacemode
Interface Config
202-10088-01, March 2005
Switching Commands