User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value from 1-30.
Default
Format
Mode
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
Format
Mode
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
Default
Format
Mode
no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
Format
Mode
sntp multicast client poll-interval
This command will set the poll interval for SNTP multicast clients in seconds as a power of two
where <poll-interval> can be a value from 6 to 16.
Default
Format
Mode
8-74
5
sntp unicast client poll-timeout <poll-timeout>
Global Config
no sntp unicast client poll-timeout
Global Config
1
sntp unicast client poll-retry <poll-retry>
Global Config
no sntp unicast client poll-retry
Global Config
6
sntp multicast client poll-interval <poll-interval>
Global Config
202-10088-01, March 2005
Switching Commands