Domain-Name; No Domain-Name; Ip Dhcp Bootp Automatic; No Ip Dhcp Bootp Automatic - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
domain-name
This command specifies the domain name for a DHCP client. The <domain> specifies the domain
name string of the client.
Default
Format
Mode
no domain-name
This command removes the domain name.
Format
Mode
ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The addresses are from
the automatic address pool.
Default
Format
Mode
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are from the
automatic address pool.
Format
Mode
ip dhcp conflict logging
This command enables conflict logging on DHCP server.
Default
Format
Mode
8-88
none
domain-name <domain>
DHCP Pool Config
no domain-name
DHCP Pool Config
disable
ip dhcp bootp automatic
Global Config
no ip dhcp bootp automatic
Global Config
enabled
ip dhcp conflict logging
Global Config
202-10088-01, March 2005
Switching Commands
Advertisement
Table of Contents
