User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
arp retries
This command configures the ARP count of maximum request for retries.
The value for <retries> is an integer, which represents the maximum number of request for retries.
The range for <retries> is an integer between 0-10 retries.
Default
Format
Mode
no arp retries
This command configures the default ARP count of maximum request for retries.
Format
Mode
arp timeout
This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry ageout time
in seconds. The range for <seconds> is between 15-21600 seconds.
Default
Format
Mode
no arp timeout
This command configures the default ARP entry ageout time.
Format
Mode
clear arp-cache
This command causes all ARP entries of type dynamic to be removed from the ARP cache. If the
gateway parameter is specified, the dynamic entries of type gateway are purged as well.
10-4
4
arp retries <0-10>
Global Config
no arp retries
Global Config
1200
arp timeout <15-21600>
Global Config
no arp timeout
Global Config
202-10088-01, March 2005
Routing Commands