Policy-Map; Policy-Map Rename; Randomdrop - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

policy-map

This command establishes a new DiffServ policy. The <
alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of policy is
specific to either the inbound or outbound traffic direction as indicated by the {
Note: The policy type dictates which of the individual policy attribute commands are valid within
the policy definition.
Note: The CLI mode is changed to Policy-Map Config when this command is successfully
executed.
Format
Mode
no policy-map
This command eliminates an existing DiffServ policy. The <
of an existing DiffServ policy. This command may be issued at any time; if the policy is currently
referenced by one or more interface service attachments, this deletion attempt shall fail.
Format
Mode

policy-map rename

This command changes the name of a DiffServ policy. The <
existing DiffServ class. The <
from 1 to 31 characters uniquely identifying the policy.
Format
Mode

randomdrop

This command changes the active queue depth management scheme from the default tail drop to
RED. The first two data parameters are the average queue depth minimum and maximum
threshold values specified in bytes. The minimum threshold is an integer from 1 to 250000. The
maximum threshold is an integer from 1 to 500000, but it must be equal to or greater than the
minimum threshold. The third data parameter is the maximum drop probability and is an integer
from 0 to 100. It indicates the percentage likelihood that a packet will be dropped when the
average queue depth reaches the maximum threshold value.
Quality of Service (QoS) Commands
policy-map <policyname> <in | out>
Global Config
no policy-map <policyname>
Global Config
parameter is a case-sensitive alphanumeric string
newpolicyname>
policy-map rename <policyname> <newpolicyname>
Global Config
202-10088-01, March 2005
parameter is a case-sensitive
policyname>
parameter is the name
policyname>
is the name of an
policyname>
parameter.
in | out}
11-27