Show Forwardingdb Agetime; Show Network - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Allow New Outbound Telnet Sessions Indicates whether outbound telnet sessions will be
allowed.

show forwardingdb agetime

This command displays the timeout for address aging. In an IVL system, the [fdbid | all] parameter
is required.
Default
Format
Mode
Forwarding DB ID
Agetime

show network

This command displays configuration settings associated with the switch's network interface. The
network interface is the logical interface used for in-band connectivity with the switch via any of
the switch's front panel ports. The configuration parameters associated with the switch's network
interface do not affect the configuration of the front panel ports through which traffic is switched
or routed.
Format
Mode
IP Address
Subnet Mask
Default Gateway
Burned In MAC Address The burned in MAC address used for in-band connectivity.
8-24
all
show forwardingdb agetime [fdbid | all]
Privileged EXEC
Fdbid (Forwarding database ID) indicates the forwarding data-
base whose aging timeout is to be shown. The all option is used to
display the aging timeouts associated with all forwarding data-
bases. This field displays the forwarding database ID in an IVL
system.
In an IVL system, this parameter displays the address aging time-
out for the associated forwarding database.
show network
Privileged EXEC and User EXEC
The IP address of the interface. The factory default value is
0.0.0.0
The IP subnet mask for this interface. The factory default value is
0.0.0.0
The default gateway for this IP interface. The factory default
value is 0.0.0.0
202-10088-01, March 2005
Switching Commands