Script Delete; Script List; Script Show; Script Validate - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

18.5.2 script delete

This command deletes a specified script where the
of the script to delete. The
Format
Mode

18.5.3 script list

This command lists all scripts present on the switch as well as the remaining available
space.
Format
Mode
Configuration
Script
Size

18.5.4 script show

This command displays the contents of a script file, which is named
Format
Mode
Output Format

18.5.5 script validate

This command validates a script file by parsing each line in the script file where
<scriptname>
used as a tool for script development. Validation identifies potential problems. It might not
identify all problems with a given script on any given device.
Format
Mode
18-28
option deletes all the scripts present on the switch.
<all>
script delete {<scriptname> | all}
Global Config
script list
Global Config
Name of the script.
Size of the script.
script show <scriptname>
Global Config
line <number>: <line contents>
is the name of the script to validate.The validate option is intended to be
script validate <scriptname>
Global Config
v1.0, December 2005
parameter is the name
<scriptname>
<scriptname>
System Maintenance Commands
.