Toshiba e-STUDIO2008A Service Manual page 94

3.11 DRIVE SYSTEM
3.11.1 General Description
The drive system drives the drum, developer unit, cleaner unit, fuser unit, transport roller, feed roller
(upper/lower drawer and bypass unit) and registration roller.
The drive system is driven by the rotation of the main motor.
Registration roller clutch
(CLT1)
(Registration roller)
Bypass feed clutch
(CLT2)
(Bypass feed roller)
Hi-speed clutch
(CLT5)
(Transport roller)
Low-speed clutch
(CLT6)
2nd drawer feed clutch
(CLT4)
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
OUTLINE OF THE MACHINE
(Drum)
Fig. 3-30
© 2015 TOSHIBA TEC CORPORATION All rights reserved
3 - 48
Toner motor
(M4)
Main motor
(M8)
1st drawer feed clutch
(CLT3)
(1st drawer)
1st drawer tray-up motor
(M11)
(2nd drawer)
2nd drawer tray-up motor
(M12)