Toshiba e-STUDIO2008A Service Manual page 226

4.8.5 Auto-toner sensor (S4)
(1) Remove the developer material.
( P. 4-104 "4.8.2 Removing developer
material")
(2) Place the developer unit upside down.
Disconnect 1 connector.
(3) Take off the auto-toner sensor by rotating it.
4.8.6 Drum thermistor (THMS4)
(1) Remove the developer material.
( P. 4-104 "4.8.2 Removing developer
material")
(2) Disconnect 1 connector, remove 1 screw and
take off the drum thermistor.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
Connector
Auto-toner sensor
Drum thermistor
Connector
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 106
Fig. 4-286
Fig. 4-287
Fig. 4-288