Toshiba e-STUDIO2008A Service Manual page 162

4.5.3 Bypass separation roller
(1) Remove the bypass feed roller.
 P. 4-39 "4.5.2 Bypass feed roller"
(2) Lift the bypass separation roller [1] to remove
it.
Notes:
• When installing/removing, do not twist the
film.
• Handle the bypass separation roller with
care so that no dirt, oils or stains adhere.
• Be careful not to drop the parts inside the
equipment.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 42
Fig. 4-109
Fig. 4-110
Fig. 4-111