Toshiba e-STUDIO2008A Service Manual page 223

(5) Release the harness from the harness guide
[2]. Remove 2 screws and take off the
process unit front cover [3].
(6) Lift up the drum cleaner unit [4] and separate
it from developer unit [5].
Notes:
1. Be careful not to touch or scratch the
drum surface at this time.
2. Do not deform the guide film [6] of
developer unit by touching this.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-277
Fig. 4-278
Fig. 4-279
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 103
DISASSEMBLY AND REPLACEMENT
4